feat: add OpenLane hardening config for LDPC decoder (50 MHz)

- config.json: 20ns clock period, AREA 2 synth strategy, 2800x1760um die
- pin_order.cfg: Wishbone pins on south, outputs on north
- base_ldpc.sdc: Caravel-calibrated timing constraints adapted for LDPC ports
- Updated wrapper config to reference ldpc_decoder_top macro

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>

openlane/ldpc_decoder_top/base_ldpc.sdc

@@ -0,0 +1,116 @@
+# SDC constraints for ldpc_decoder_top
+# Adapted from Caravel user_proj_example SDC
+# Target: 50 MHz (20 ns period)
+
+### Note:
+# - input clock transition and latency are set for clk port.
+# - IO ports are assumed to be asynchronous (IO_SYNC=0).
+
+#------------------------------------------#
+# Pre-defined Constraints
+#------------------------------------------#
+
+set ::env(IO_SYNC) 0
+
+# Clock network
+if {[info exists ::env(CLOCK_PORT)] && $::env(CLOCK_PORT) != ""} {
+	set clk_input $::env(CLOCK_PORT)
+	create_clock [get_ports $clk_input] -name clk -period $::env(CLOCK_PERIOD)
+	puts "\[INFO\]: Creating clock {clk} for port $clk_input with period: $::env(CLOCK_PERIOD)"
+} else {
+	set clk_input __VIRTUAL_CLK__
+	create_clock -name clk -period $::env(CLOCK_PERIOD)
+	puts "\[INFO\]: Creating virtual clock with period: $::env(CLOCK_PERIOD)"
+}
+if { ![info exists ::env(SYNTH_CLK_DRIVING_CELL)] } {
+	set ::env(SYNTH_CLK_DRIVING_CELL) $::env(SYNTH_DRIVING_CELL)
+}
+if { ![info exists ::env(SYNTH_CLK_DRIVING_CELL_PIN)] } {
+	set ::env(SYNTH_CLK_DRIVING_CELL_PIN) $::env(SYNTH_DRIVING_CELL_PIN)
+}
+
+# Clock non-idealities
+set_propagated_clock [all_clocks]
+set_clock_uncertainty $::env(SYNTH_CLOCK_UNCERTAINTY) [get_clocks {clk}]
+puts "\[INFO\]: Setting clock uncertainity to: $::env(SYNTH_CLOCK_UNCERTAINTY)"
+set_clock_transition $::env(SYNTH_CLOCK_TRANSITION) [get_clocks {clk}]
+puts "\[INFO\]: Setting clock transition to: $::env(SYNTH_CLOCK_TRANSITION)"
+
+# Maximum transition time for the design nets
+set_max_transition $::env(MAX_TRANSITION_CONSTRAINT) [current_design]
+puts "\[INFO\]: Setting maximum transition to: $::env(MAX_TRANSITION_CONSTRAINT)"
+
+# Maximum fanout
+set_max_fanout $::env(MAX_FANOUT_CONSTRAINT) [current_design]
+puts "\[INFO\]: Setting maximum fanout to: $::env(MAX_FANOUT_CONSTRAINT)"
+
+# Timing paths delays derate
+set_timing_derate -early [expr {1-$::env(SYNTH_TIMING_DERATE)}]
+set_timing_derate -late [expr {1+$::env(SYNTH_TIMING_DERATE)}]
+puts "\[INFO\]: Setting timing derate to: [expr {$::env(SYNTH_TIMING_DERATE) * 100}] %"
+
+# Reset input delay
+set_input_delay [expr $::env(CLOCK_PERIOD) * 0.5] -clock [get_clocks {clk}] [get_ports {rst_n}]
+
+# Multicycle paths for Wishbone handshake
+set_multicycle_path -setup 2 -through [get_ports {wb_ack_o}]
+set_multicycle_path -hold 1  -through [get_ports {wb_ack_o}]
+set_multicycle_path -setup 2 -through [get_ports {wb_cyc_i}]
+set_multicycle_path -hold 1  -through [get_ports {wb_cyc_i}]
+set_multicycle_path -setup 2 -through [get_ports {wb_stb_i}]
+set_multicycle_path -hold 1  -through [get_ports {wb_stb_i}]
+
+#------------------------------------------#
+# Retrieved Constraints (from Caravel)
+#------------------------------------------#
+
+# Clock source latency
+set clk_max_latency 5.57
+set clk_min_latency 4.65
+set_clock_latency -source -max $clk_max_latency [get_clocks {clk}]
+set_clock_latency -source -min $clk_min_latency [get_clocks {clk}]
+puts "\[INFO\]: Setting clock latency range: $clk_min_latency : $clk_max_latency"
+
+# Clock input Transition
+set clk_tran 0.61
+set_input_transition $clk_tran [get_ports $clk_input]
+puts "\[INFO\]: Setting clock transition: $clk_tran"
+
+# Input delays (scaled from Caravel characterization)
+set_input_delay -max 3.17 -clock [get_clocks {clk}] [get_ports {wb_sel_i[*]}]
+set_input_delay -max 3.74 -clock [get_clocks {clk}] [get_ports {wb_we_i}]
+set_input_delay -max 3.89 -clock [get_clocks {clk}] [get_ports {wb_adr_i[*]}]
+set_input_delay -max 4.13 -clock [get_clocks {clk}] [get_ports {wb_stb_i}]
+set_input_delay -max 4.61 -clock [get_clocks {clk}] [get_ports {wb_dat_i[*]}]
+set_input_delay -max 4.74 -clock [get_clocks {clk}] [get_ports {wb_cyc_i}]
+set_input_delay -min 0.79 -clock [get_clocks {clk}] [get_ports {wb_adr_i[*]}]
+set_input_delay -min 1.04 -clock [get_clocks {clk}] [get_ports {wb_dat_i[*]}]
+set_input_delay -min 1.19 -clock [get_clocks {clk}] [get_ports {wb_sel_i[*]}]
+set_input_delay -min 1.65 -clock [get_clocks {clk}] [get_ports {wb_we_i}]
+set_input_delay -min 1.69 -clock [get_clocks {clk}] [get_ports {wb_cyc_i}]
+set_input_delay -min 1.86 -clock [get_clocks {clk}] [get_ports {wb_stb_i}]
+
+# Input Transition
+set_input_transition -max 0.14  [get_ports {wb_we_i}]
+set_input_transition -max 0.15  [get_ports {wb_stb_i}]
+set_input_transition -max 0.17  [get_ports {wb_cyc_i}]
+set_input_transition -max 0.18  [get_ports {wb_sel_i[*]}]
+set_input_transition -max 0.84  [get_ports {wb_dat_i[*]}]
+set_input_transition -max 0.92  [get_ports {wb_adr_i[*]}]
+set_input_transition -min 0.07  [get_ports {wb_adr_i[*]}]
+set_input_transition -min 0.07  [get_ports {wb_dat_i[*]}]
+set_input_transition -min 0.09  [get_ports {wb_cyc_i}]
+set_input_transition -min 0.09  [get_ports {wb_sel_i[*]}]
+set_input_transition -min 0.09  [get_ports {wb_we_i}]
+set_input_transition -min 0.15  [get_ports {wb_stb_i}]
+
+# Output delays
+set_output_delay -max 0.7  -clock [get_clocks {clk}] [get_ports {irq_o}]
+set_output_delay -max 3.62 -clock [get_clocks {clk}] [get_ports {wb_dat_o[*]}]
+set_output_delay -max 8.41 -clock [get_clocks {clk}] [get_ports {wb_ack_o}]
+set_output_delay -min 0    -clock [get_clocks {clk}] [get_ports {irq_o}]
+set_output_delay -min 1.13 -clock [get_clocks {clk}] [get_ports {wb_dat_o[*]}]
+set_output_delay -min 1.37 -clock [get_clocks {clk}] [get_ports {wb_ack_o}]
+
+# Output loads
+set_load 0.19 [all_outputs]