test: add standalone Verilator testbench for LDPC decoder

Add tb/tb_ldpc_decoder.sv with Wishbone read/write tasks, version
register test, and all-zero codeword decode test. Add tb/Makefile
with lint and sim targets.

Fix two RTL bugs found during testbench bring-up:
- ldpc_decoder_core.sv: skip unconnected H_BASE columns (shift=-1)
  in LAYER_READ, LAYER_WRITE, and SYNDROME states to prevent
  out-of-bounds array access and belief corruption
- ldpc_decoder_core.sv: fix syndrome_ok timing race by adding
  SYNDROME_DONE state so the registered result is available before
  the early-termination decision
- wishbone_interface.sv: fix VERSION_ID typo (0xLD01 -> 0x1D01)

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>

rtl/ldpc_decoder_core.sv

@@ -112,13 +112,14 @@ module ldpc_decoder_core #(
     // Decoder FSM
     // =========================================================================
 
-    typedef enum logic [2:0] {
+    typedef enum logic [3:0] {
         IDLE,
         INIT,           // Initialize beliefs from channel LLRs, zero messages
         LAYER_READ,     // Read Z beliefs for each of DC columns in current row
         CN_UPDATE,      // Run min-sum CN update on gathered messages
         LAYER_WRITE,    // Write updated beliefs and new CN->VN messages
         SYNDROME,       // Check syndrome after full iteration
+        SYNDROME_DONE,  // Read registered syndrome result
         DONE
     } state_t;
 
@@ -167,7 +168,8 @@ module ldpc_decoder_core #(
                         state_next = LAYER_READ;  // next row
                 end
             end
-            SYNDROME: begin
+            SYNDROME:    state_next = SYNDROME_DONE;
+            SYNDROME_DONE: begin
                 if (syndrome_ok && early_term_en)
                     state_next = DONE;
                 else if (iter_cnt >= effective_max_iter)
@@ -192,6 +194,7 @@ module ldpc_decoder_core #(
             converged  <= 1'b0;
             iter_used  <= '0;
             syndrome_weight <= '0;
+            syndrome_ok <= 1'b0;
         end else begin
             case (state)
                 IDLE: begin
@@ -199,6 +202,7 @@ module ldpc_decoder_core #(
                     row_idx   <= '0;
                     col_idx   <= '0;
                     converged <= 1'b0;
+                    syndrome_ok <= 1'b0;
                 end
 
                 INIT: begin
@@ -221,18 +225,25 @@ module ldpc_decoder_core #(
                     // VN->CN = belief - old CN->VN message
                     // (belief already contains the sum of ALL CN->VN messages,
                     //  so subtracting the current row's message gives the extrinsic)
-                    for (int z = 0; z < Z; z++) begin
-                        int bit_idx;
-                        int shifted_z;
-                        logic signed [Q-1:0] old_msg;
-                        logic signed [Q-1:0] belief_val;
+                    // Skip unconnected columns (H_BASE == -1)
+                    if (H_BASE[row_idx][col_idx] >= 0) begin
+                        for (int z = 0; z < Z; z++) begin
+                            int bit_idx;
+                            int shifted_z;
+                            logic signed [Q-1:0] old_msg;
+                            logic signed [Q-1:0] belief_val;
 
-                        shifted_z = (z + H_BASE[row_idx][col_idx]) % Z;
-                        bit_idx   = int'(col_idx) * Z + shifted_z;
-                        old_msg   = msg_cn2vn[row_idx][col_idx][z];
-                        belief_val = beliefs[bit_idx];
+                            shifted_z = (z + H_BASE[row_idx][col_idx]) % Z;
+                            bit_idx   = int'(col_idx) * Z + shifted_z;
+                            old_msg   = msg_cn2vn[row_idx][col_idx][z];
+                            belief_val = beliefs[bit_idx];
 
-                        vn_to_cn[col_idx][z] <= sat_sub(belief_val, old_msg);
+                            vn_to_cn[col_idx][z] <= sat_sub(belief_val, old_msg);
+                        end
+                    end else begin
+                        // Unconnected: set VN->CN messages to 0
+                        for (int z = 0; z < Z; z++)
+                            vn_to_cn[col_idx][z] <= '0;
                     end
 
                     if (col_idx == N_BASE - 1)
@@ -261,22 +272,25 @@ module ldpc_decoder_core #(
 
                 LAYER_WRITE: begin
                     // Write back: update beliefs and store new CN->VN messages
-                    for (int z = 0; z < Z; z++) begin
-                        int bit_idx;
-                        int shifted_z;
-                        logic signed [Q-1:0] new_msg;
-                        logic signed [Q-1:0] old_extrinsic;
+                    // Skip unconnected columns (H_BASE == -1)
+                    if (H_BASE[row_idx][col_idx] >= 0) begin
+                        for (int z = 0; z < Z; z++) begin
+                            int bit_idx;
+                            int shifted_z;
+                            logic signed [Q-1:0] new_msg;
+                            logic signed [Q-1:0] old_extrinsic;
 
-                        shifted_z = (z + H_BASE[row_idx][col_idx]) % Z;
-                        bit_idx   = int'(col_idx) * Z + shifted_z;
-                        new_msg   = cn_to_vn[col_idx][z];
-                        old_extrinsic = vn_to_cn[col_idx][z];
+                            shifted_z = (z + H_BASE[row_idx][col_idx]) % Z;
+                            bit_idx   = int'(col_idx) * Z + shifted_z;
+                            new_msg   = cn_to_vn[col_idx][z];
+                            old_extrinsic = vn_to_cn[col_idx][z];
 
-                        // belief = extrinsic (VN->CN) + new CN->VN message
-                        beliefs[bit_idx] <= sat_add(old_extrinsic, new_msg);
+                            // belief = extrinsic (VN->CN) + new CN->VN message
+                            beliefs[bit_idx] <= sat_add(old_extrinsic, new_msg);
 
-                        // Store new message for next iteration
-                        msg_cn2vn[row_idx][col_idx][z] <= new_msg;
+                            // Store new message for next iteration
+                            msg_cn2vn[row_idx][col_idx][z] <= new_msg;
+                        end
                     end
 
                     if (col_idx == N_BASE - 1) begin
@@ -292,25 +306,32 @@ module ldpc_decoder_core #(
 
                 SYNDROME: begin
                     // Check H * c_hat == 0 (compute syndrome weight)
+                    // Only include connected columns (H_BASE >= 0)
                     syndrome_cnt = '0;
                     for (int r = 0; r < M_BASE; r++) begin
                         for (int z = 0; z < Z; z++) begin
                             logic parity;
                             parity = 1'b0;
                             for (int c = 0; c < N_BASE; c++) begin
-                                int shifted_z, bit_idx;
-                                shifted_z = (z + H_BASE[r][c]) % Z;
-                                bit_idx = c * Z + shifted_z;
-                                parity = parity ^ beliefs[bit_idx][Q-1]; // sign bit = hard decision
+                                if (H_BASE[r][c] >= 0) begin
+                                    int shifted_z, bit_idx;
+                                    shifted_z = (z + H_BASE[r][c]) % Z;
+                                    bit_idx = c * Z + shifted_z;
+                                    parity = parity ^ beliefs[bit_idx][Q-1];
+                                end
                             end
                             if (parity) syndrome_cnt = syndrome_cnt + 1;
                         end
                     end
                     syndrome_weight <= syndrome_cnt;
-                    syndrome_ok = (syndrome_cnt == 0);
+                    syndrome_ok <= (syndrome_cnt == 0);
 
                     iter_cnt <= iter_cnt + 1;
                     iter_used <= iter_cnt + 1;
+                end
+
+                SYNDROME_DONE: begin
+                    // Check registered syndrome result
                     if (syndrome_ok) converged <= 1'b1;
                 end
 

rtl/wishbone_interface.sv

@@ -40,7 +40,7 @@ module wishbone_interface #(
     output logic                    irq_o
 );
 
-    localparam VERSION_ID = 32'hLD01_0001;  // LDPC v0.1 build 1
+    localparam VERSION_ID = 32'h1D01_0001;  // LDPC v0.1 build 1
 
     // Wishbone handshake: ack on valid cycle
     logic wb_valid;

tb/Makefile

@@ -0,0 +1,28 @@
+RTL_DIR = ../rtl
+RTL_FILES = $(RTL_DIR)/ldpc_decoder_top.sv \
+            $(RTL_DIR)/ldpc_decoder_core.sv \
+            $(RTL_DIR)/wishbone_interface.sv
+
+.PHONY: lint sim clean
+
+lint:
+	verilator --lint-only -Wall \
+		-Wno-WIDTHEXPAND -Wno-WIDTHTRUNC -Wno-CASEINCOMPLETE \
+		-Wno-BLKSEQ -Wno-BLKLOOPINIT -Wno-UNUSEDSIGNAL -Wno-UNUSEDPARAM \
+		--unroll-count 1024 \
+		$(RTL_FILES) --top-module ldpc_decoder_top
+
+sim: obj_dir/Vtb_ldpc_decoder
+	./obj_dir/Vtb_ldpc_decoder
+
+obj_dir/Vtb_ldpc_decoder: tb_ldpc_decoder.sv $(RTL_FILES)
+	verilator --binary --timing --trace \
+		-o Vtb_ldpc_decoder \
+		-Wno-WIDTHEXPAND -Wno-WIDTHTRUNC -Wno-CASEINCOMPLETE \
+		-Wno-BLKSEQ -Wno-BLKLOOPINIT -Wno-UNUSEDSIGNAL -Wno-UNUSEDPARAM \
+		--unroll-count 1024 \
+		tb_ldpc_decoder.sv $(RTL_FILES) \
+		--top-module tb_ldpc_decoder
+
+clean:
+	rm -rf obj_dir *.vcd

tb/tb_ldpc_decoder.sv

@@ -0,0 +1,245 @@
+// Standalone Verilator testbench for LDPC decoder
+// Tests the decoder core directly via Wishbone (no Caravel dependency)
+//
+// Test 1: Read VERSION register (expect 0x1D010001)
+// Test 2: Decode all-zero codeword with strong +31 LLRs
+
+`timescale 1ns / 1ps
+
+module tb_ldpc_decoder;
+
+    // =========================================================================
+    // Clock and reset
+    // =========================================================================
+
+    logic        clk;
+    logic        rst_n;
+    logic        wb_cyc_i;
+    logic        wb_stb_i;
+    logic        wb_we_i;
+    logic [7:0]  wb_adr_i;
+    logic [31:0] wb_dat_i;
+    logic [31:0] wb_dat_o;
+    logic        wb_ack_o;
+    logic        irq_o;
+
+    // 50 MHz clock (20 ns period)
+    initial clk = 0;
+    always #10 clk = ~clk;
+
+    // =========================================================================
+    // DUT instantiation
+    // =========================================================================
+
+    ldpc_decoder_top dut (
+        .clk       (clk),
+        .rst_n     (rst_n),
+        .wb_cyc_i  (wb_cyc_i),
+        .wb_stb_i  (wb_stb_i),
+        .wb_we_i   (wb_we_i),
+        .wb_adr_i  (wb_adr_i),
+        .wb_dat_i  (wb_dat_i),
+        .wb_dat_o  (wb_dat_o),
+        .wb_ack_o  (wb_ack_o),
+        .irq_o     (irq_o)
+    );
+
+    // =========================================================================
+    // VCD dump
+    // =========================================================================
+
+    initial begin
+        $dumpfile("tb_ldpc_decoder.vcd");
+        $dumpvars(0, tb_ldpc_decoder);
+    end
+
+    // =========================================================================
+    // Watchdog timeout
+    // =========================================================================
+
+    int cycle_cnt;
+
+    initial begin
+        cycle_cnt = 0;
+        forever begin
+            @(posedge clk);
+            cycle_cnt++;
+            if (cycle_cnt > 100000) begin
+                $display("TIMEOUT: exceeded 100000 cycles");
+                $finish;
+            end
+        end
+    end
+
+    // =========================================================================
+    // Wishbone tasks
+    // =========================================================================
+
+    task automatic wb_write(input logic [7:0] addr, input logic [31:0] data);
+        @(posedge clk);
+        wb_cyc_i = 1'b1;
+        wb_stb_i = 1'b1;
+        wb_we_i  = 1'b1;
+        wb_adr_i = addr;
+        wb_dat_i = data;
+
+        // Wait for ack
+        do begin
+            @(posedge clk);
+        end while (!wb_ack_o);
+
+        // Deassert
+        wb_cyc_i = 1'b0;
+        wb_stb_i = 1'b0;
+        wb_we_i  = 1'b0;
+    endtask
+
+    task automatic wb_read(input logic [7:0] addr, output logic [31:0] data);
+        @(posedge clk);
+        wb_cyc_i = 1'b1;
+        wb_stb_i = 1'b1;
+        wb_we_i  = 1'b0;
+        wb_adr_i = addr;
+
+        // Wait for ack
+        do begin
+            @(posedge clk);
+        end while (!wb_ack_o);
+
+        data = wb_dat_o;
+
+        // Deassert
+        wb_cyc_i = 1'b0;
+        wb_stb_i = 1'b0;
+    endtask
+
+    // =========================================================================
+    // Test variables
+    // =========================================================================
+
+    int pass_cnt;
+    int fail_cnt;
+    logic [31:0] rd_data;
+
+    // =========================================================================
+    // Main test sequence
+    // =========================================================================
+
+    initial begin
+        pass_cnt = 0;
+        fail_cnt = 0;
+
+        // Initialize Wishbone signals
+        wb_cyc_i = 1'b0;
+        wb_stb_i = 1'b0;
+        wb_we_i  = 1'b0;
+        wb_adr_i = 8'h00;
+        wb_dat_i = 32'h0;
+
+        // Reset
+        rst_n = 1'b0;
+        repeat (10) @(posedge clk);
+        rst_n = 1'b1;
+        repeat (5) @(posedge clk);
+
+        // =================================================================
+        // TEST 1: Read VERSION register
+        // =================================================================
+
+        $display("[TEST 1] Read VERSION register");
+        wb_read(8'h54, rd_data);
+
+        if (rd_data === 32'h1D01_0001) begin
+            $display("  PASS: VERSION = 0x%08X", rd_data);
+            pass_cnt++;
+        end else begin
+            $display("  FAIL: VERSION = 0x%08X (expected 0x1D010001)", rd_data);
+            fail_cnt++;
+        end
+
+        // =================================================================
+        // TEST 2: Decode clean all-zero codeword
+        // =================================================================
+
+        $display("[TEST 2] Decode clean all-zero codeword");
+
+        // Write 52 LLR words at addresses 0x10..0xDC
+        // Each word = 5x +31 packed: {6'h1F, 6'h1F, 6'h1F, 6'h1F, 6'h1F}
+        // = 0x1F | (0x1F<<6) | (0x1F<<12) | (0x1F<<18) | (0x1F<<24)
+        // = 0x1F7DF7DF
+        begin
+            int i;
+            for (i = 0; i < 52; i++) begin
+                wb_write(8'h10 + i * 4, 32'h1F7D_F7DF);
+            end
+        end
+
+        // Start decode: write CTRL
+        // bit[0]=1 (start), bit[1]=1 (early_term), bits[12:8]=0x1E=30 (max_iter)
+        // 0x00001E03
+        wb_write(8'h00, 32'h0000_1E03);
+
+        // Poll STATUS (addr 0x04) until busy (bit[0]) = 0
+        // Allow a few cycles for busy to assert first
+        repeat (5) @(posedge clk);
+
+        begin
+            int poll_cnt;
+            poll_cnt = 0;
+            do begin
+                wb_read(8'h04, rd_data);
+                poll_cnt++;
+                if (poll_cnt > 10000) begin
+                    $display("  FAIL: decoder stuck busy after %0d polls", poll_cnt);
+                    fail_cnt++;
+                    $display("=== %0d PASSED, %0d FAILED ===", pass_cnt, fail_cnt);
+                    $finish;
+                end
+            end while (rd_data[0] == 1'b1);
+        end
+
+        // Check convergence: bit[1] of STATUS
+        if (rd_data[1] == 1'b1) begin
+            $display("  converged=1 (OK)");
+        end else begin
+            $display("  FAIL: converged=0 (expected 1)");
+            fail_cnt++;
+        end
+
+        // Check syndrome weight: bits[23:16] of STATUS
+        if (rd_data[23:16] == 8'd0) begin
+            $display("  syndrome_weight=0 (OK)");
+        end else begin
+            $display("  FAIL: syndrome_weight=%0d (expected 0)", rd_data[23:16]);
+            fail_cnt++;
+        end
+
+        // Check iterations used: bits[12:8] of STATUS
+        $display("  iterations_used=%0d", rd_data[12:8]);
+
+        // Read DECODED register (addr 0x50)
+        wb_read(8'h50, rd_data);
+
+        if (rd_data === 32'h0000_0000) begin
+            $display("  PASS: decoded=0x%08X", rd_data);
+            pass_cnt++;
+        end else begin
+            $display("  FAIL: decoded=0x%08X (expected 0x00000000)", rd_data);
+            fail_cnt++;
+        end
+
+        // =================================================================
+        // Summary
+        // =================================================================
+
+        $display("");
+        if (fail_cnt == 0) begin
+            $display("=== ALL %0d TESTS PASSED ===", pass_cnt);
+        end else begin
+            $display("=== %0d PASSED, %0d FAILED ===", pass_cnt, fail_cnt);
+        end
+
+        $finish;
+    end
+
+endmodule